Allen Auto Repair

Your vehicle’s engine runs hot.  It should, since it’s a series of little explosions that create the power that gets you going where you want to go.  To keep the engine cool, engineers have designed wonderful cooling systems that use liquid coolant, hoses, and a radiator to transfer the heat from the engine to the outside air.  In order for the system to work right, it has to have the right amount of that liquid coolant in it.  So that you know when the coolant has dipped below the correct amount, there is a sensor that keeps an eye on it.  When the coolant gets low, that sensor lights up a signal on the dash to alert you.  It may literally say “Check Coolant” or it may have a picture that looks like an old-style bulb thermometer sitting in liquid.  Your owner’s manual will usually tell you exactly what the one in your vehicle looks like. If that sensor system isn’t working right, you could wind up driving for a lo ... read more

In a perfect world, all wheels and tires would be perfectly round and weigh exactly the same at every point of the wheel.  Unfortunately, they're not, and if they're out of balance, they can reduce the lifespan of your tires, make your vehicle shake like a carnival ride, and maybe even damage a few suspension parts along the way.  You don't want that! Wheel balancing, sometimes known as tire balancing, is a process by which a technician makes sure your tire/wheel assembly has evenly distributed weight.  If it isn't, it can give your ride bad vibrations.  If you feel your vehicle's steering wheel shaking, it can mean unbalanced wheels in the front. If you can feel a vibration in your seats, it could be unbalanced rear wheels. In addition to your vehicle vibrating at higher speeds, there are other signs that your wheels are out of balance. You may see uneven tread wear, or you may notice you aren't getting the kind of fuel economy you used to.  When you experienc ... read more

Ever wonder how your vehicle’s transmission is connected to your wheels? After all, when you hit a pothole or some other uneven part of a road’s surface, there has to be something that can maintain the connection between the transmission and the wheel yet keep everything moving at the same speed.  That very cool device is called a CV joint, a kind of driveshaft running to each wheel.  The CV stands for constant velocity because it keeps the drive wheels moving at a constant speed (velocity).  They’re used mostly on front-wheel drive vehicles but also in rear-wheel and all-wheel drive vehicles. The joints move up and down and adjust to bumpy surfaces.  Plus, they are covered in a rubber boot which protects them from road debris and also holds lubrication in.  There’s a CV joint and boot on the transmission side and one on the wheel side.  Unfortunately, the spot that usually fails first is that rubber protective cover (the boot).&nbs ... read more