Allen Auto Repair

Every day you drive, you're sitting behind the dashboard. But how in the world did it get that name? Back in the days of the horse-drawn carriage, horses would kick up dirt and mud on the driver and passengers, "dashing" debris against the carriage. So those who built carriages began installing a board to protect them. So, dash-board. Dashboard. The dashboard is still there, though changed quite a bit from the early days. Now its main purpose is to house the controls and instruments for your vehicle's systems. Of course, you have the speedometer, tachometer and gas gauge. But there are four warning lights you need to pay attention to on your dashboard and instrument panel. Some of these may even be gauges, depending on your model of vehicle. Regardless, paying attention to them is a good idea if you want your vehicle to keep going as long as possible. Oil pressure—The oil pressure light will come on if your engine doesn't have enough pressure in its system. Low oil pressure means ... read more

If you've ever felt your vehicle hesitate, go, then hesitate again, you might think there's something wrong with the transmission.  After all, it's not moving smoothly  down the road.  But there are plenty of malfunctions that can cause those symptoms, one of them being something you may have never heard of: the EGR valve. EGR stands for Exhaust Gas Recirculation. It's a system that channels small amounts of exhaust back into the engine to cool down the cylinders and reduce polluting gases.  Those include nitrogen oxides that can cause smog. The EGR valve regulates how much of the vehicle's exhaust gas is recirculated. After years and long distances traveled, that valve can get clogged or fail. Sometimes the EGR valve can stick open.  When the EGR valve isn't working properly, your vehicle can start releasing those nitrogen oxides and pollute the air. The symptoms of a malfunctioning EGR valve include: Engine losing power Engine idling roughly Pinging and knoc ... read more

You probably have heard that expression, "A stitch in time saves nine." In other words, if you fix an issue at its early stages, it will prevent a much more difficult problem later. That's certainly the case with your vehicle, and here's a true story to demonstrate it. A driver noticed his vehicle was due for an oil change, so he took it in to his service facility early in the morning so he could wait while the work was performed. The technician routinely checks the battery on vehicles just before extreme weather is approaching (cold or hot), so with winter coming up, he hooked up the load tester (it measures voltage while a load is put on the battery). It showed the battery wasn't holding a charge well. The technician checked the manufacturing date on the battery, too (most batteries have a date stamped in code somewhere on them). The date showed it was five years old. While batteries can last more than five years, many technicians say you should expect to get anywhere from three to s ... read more

It's happened to all of us.  We're driving down a highway at night and over a crest appears a car with its high beams blazing.  You are momentarily blinded, hoping the other driver will switch them to their low beam setting and restore your vision. Not only do we not appreciate being blinded, face it; we don’t want to be that other driver, either.  You know, the one who forgets to turn down their high beams. Why do we want high beams in the first place? They can improve safety when used correctly, giving drivers more reaction time since they can see farther down the road.  But research has found many drivers either don't use them or, when they do, they frequently forget to switch to low beams.  Enter the automatic high-beam dimmer. The quest for the perfect one began back in the 1950s, General Motors invented something it called the "Autronic Eye." It was a phototube which sat on the dashboard and turned down your beams when it saw other headlights.  ... read more